Guide To Riding Recumbent Bicycles

By Virginia Myers


Exercise comes in many forms, but going on a bike ride is a great way to accomplish your goals without straining your knees and shins. The tradition ten-speed type of bike can cause other types of issues since you often have to hunch over the handlebars. Using recumbent bicycles provides a much more enjoyable experience because you can sit back and relax. Before you take off for the first time, you need to be aware of the differences from the ten speed type of bike ride.

These bikes have a different way of mounting. Swing your leg forward over the frame rather than backward. Remember, the seat is a reclining style. Swinging your leg over backward will result in you kicking the seat and possibly toppling over.

Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.

Be sure to hold the brake when getting on or off. This may seem like common sense, but it is more important on this style of bike. Until you are used to getting on the bike, this will simplify the first and last step of the ride.

This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.

Set your pedal angle before starting. While sitting on the seat, spin the pedal to 12 o'clock, straight up and down, so you can have the best push effort when you start riding. Some might suggest a 2 o'clock position, but having the pedal straight up gives you better starting power.

Sit back, relax, and enjoy the ride. The whole idea of this type of cycle is to be able to look up and around while you are riding. You don't have to be hunched over the bars and front wheel anymore.

Push off with your pedal, not your foot. Many traditional rides begin by pushing off with the foot that is planted on the ground. With this type of ride, you are not in a strong position to push off with the ground foot. Instead, start pedaling and immediately move the ground foot to the other pedal to get going.

Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.

These cycles are designed so you can enjoy the ride. Remember not to focus on the ground and use a light touch with the handlebars. You'll feel better and be able to ride farther and longer because of the reclining position. You won't tire as easily as a speed bike ride and your knees and shins will thank you.




About the Author:



0 comments:

Post a Comment

top